logo
logo

Double Column DCA - 160, 260, 340

Fully Automatic Double Column Band Saw Machines Model - DCA 160, 260, 340
Double Column DCA - 160, 260, 340

Features :

  • Heavy duty.... High Speed
  • Low Cost
  • High Productivity
  • Large Cross Section of Swing Frame
  • Integral Front & Rear Bed Design
Enquiry

Specifications :

Cutting Capacity Bullet 160
ø 160
Bullet 260
ø 260
Bullet 340
ø 340
Bullet 421
ø 421
Bullet 550
ø 550
Bullet 650
ø 650
Blade Size 3505x27 x 0.9 mm 4100x34 x 1.1 mm 4570x34 x 1.1 mm 5300x41 x 1.3 mm 6270 x 41 x 1.3 mm 7600 x 54 x 1.6 mm
Feed Length 0-400 mm 0-400 mm 0-400 mm 0-400 mm ------ ------
Drive Motor 2 HP 3 HP 5 HP 7 HP 7 HP 10 HP
Hydraulic Motor 1 HP 1 HP 1.5 HP 1.5 HP 2 HP 2 HP
Coolant 0.15 H.P 0.15 H.P 0.15 H.P 0.15 H.P 0.2 HP 0.2 HP
Band Tension Manual / Hydraulic optional Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

Vertical saw Head :

Vertical saw Head is supported rigid induction hardened & hard crome plated & ground guide Columns. Blade tensioning is done by Manual/Hydraulically operated cylinders. Auto height sensor optimizes ideal position of blade with least down time.

Saw Feed :

Vertical saw Head up down motion is controlled by one hydraulic cylinder. Feed for various materials is regulated by temperature and pressure compensatede flow control valve. FFC valve is provided to control the cutting pressure required for various types of Material & different tensile strength and BHN.

Clamping :

Clamping of job is done by Hydraulically operated vice jaws. Fixed Vice Jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provided as optional accessories.

Floating Vice Jaws :

To accommodate bend back bars. Floating vice jaw arrangement is provided for shuttle vice. This feature comes only in fully Automatic Double Column Model.

Accuracy :

Taper 0.1 mm for 100 mm. Length ± 0.2 mm

Band wheels :

Drive and driven band wheels with optimum centre distance gives smooth blade twisting force which results in excellent performance of blade.

Standard Equipments :

  • Complete electrical equipment with panel board, limit switch & electric motors
  • Complete hydraulic system with Yuken make DC valve.
  • Coolant System with pump and piping.
  • Power driven chip brush for easy chip removal from blade.
  • One M42 grade bimetal blade.
  • Operation tools & spanners.

Optional Equipments :

  • Chip Brushes
  • Roller table 1500 mm
  • Bimetal Band saw blade
  • Variable vice pressure
  • Nesting fixture assembly for bundle cutting up to ø 35 mm polish bars.